Most likely, you have noticed that wine bottles come with a dip at the bottom. Have you ever asked yourself what exactly the reason is for this? Well, to begin with, the dip, which is actually called a punt or a kick-up, prevents the bottle from falling over. You know when you have a picnic at the beach or outdoors and oftentimes the plates of food fly over and there’s a storm of napkins in the air? And then all that strong wind comes trying to knock your bottle over.
Well, the punt says, “I don’t think so, mister.” The punt also exists in order to make the bottle stronger to hold up against higher pressure if there’s champagne or sparkling wine inside. Finally, the punt makes it easier to distribute steam during the cleaning process before the wine is poured in. Although wine bottles are stronger nowadays, they are still manufactured with this indentation in the bottom to keep with the tradition.
Loop in Back of Shirt
You've probably noticed that some men's shirts come with loops in the back of them. It was the Navy who first added this feature to the backs of men's shirts. When the men were out at sea, there wasn't much closet space. In order to save on space, sailors had loops on their shirts so that they could hang them up on hooks.
In the 1960s, the fad became popular among college students who used the loops while at the gym. Seeing an opportunity for profit, the Gant company started adding loops to the backs of their shirts in order to attract their Ivy League consumers. The loop became somewhat of a status symbol.
Metal at End of Measuring Tape
Have you ever noticed the small piece of metal at the end of the measuring tape (technically the beginning)? Most likely you have, but you haven't asked yourself what purpose it serves. There are actually several reasons why the metal is there.
To begin with, there's a little slot that can be placed around a nail to help hold the measuring tape in place in case somebody isn't around to hold the other end. Cough cough, roommate. You may have also noticed that the edge of the measuring tape is a bit serrated. The reason for this is so that it's easy to mark a wall or other surface in case you forgot that you put a pencil behind your ear to mark your measurement.
Holes in Airplane Windows
Raise your hand if you freaked out a little the first time you sat in the window seat of an airplane and noticed a tiny hole in the window. We say this not to expose you, but rather to expose the purpose of that hole. This hole doesn't allude to the fact that the window of your seat is about to explode mid-flight. First of all, the hole is called the breather hole.
If you've ever wondered how you're able to breathe in an airplane when it's so high up in the air, well, the breather hole plays a part here. When an airplane climbs, air pressure drops outside. Thanks to plane manufacturers, the cabin remains at a safe and comfortable level. If it didn't, we wouldn't be able to fly. The breather makes it possible for the two outer panels of the aircraft to manage the pressure difference.
Holes in Padlock
Have you noticed that there's a tiny hole at the bottom of the padlock? These holes, as you should have already guessed, serve a purpose. First of all, the holes are there to drain water that has entered the lock. If this wasn't possible and the water couldn't drain out, then it could end up freezing and the lock would be prone to some serious damage.
A second purpose for these holes is to allow you to pour oil or WD-40 in the lock in case it gets jammed and won't open up, which would make the item useless. So, if that treasure chest you dug up as a child has been jammed for years, you now know how to open it and get your hands on the treasure! But, we do deserve a cut of some of that gold.